CO2 degasser at heat and power plant

CO2 degasser

The CO2 degasser is an efficient and cost-effective technology for reducing carbon dioxide in water. It requires minimal maintenance, uses no consumables and is based on proven, effective technology. It is particularly cost-effective at high water flow rates and is not subject to corrosion.

The degasser is typically used to increase the filtration capacity of another water treatment plant or to increase the pH value by reducing dissolved CO2 before the next treatment stage.

Advantages of CO2 degasser

Low operating costs

The low pressure drop in the housing allows degassing up to 70 m3/h of water with a large volume of low pressure air. This results in a very low price per m3 of degassed water.

graph-stats-descend

No consumables

The only medium required for water degassing is atmospheric air in combination with plastic filler.

lab-tube

Continuous Flow

No pooling, deposits or waste build-up requiring backwashing or removal.

button-loop-arrow

No corrosion

The body is made of polypropylene, which is not subject to corrosion and destruction, which ensures a longer service life of the product.

shield-add

CO2 degasser from ECOMAX

Wide range of standard units

Our product range includes a range of ready-made CO2 degassers with capacities up to 70 m3/h.

The units are supplied with standard documentation for ease of installation, operation and maintenance.

Please contact your local sales and service office for specifications and further information.

CO2 degasser by EUROWATER

  • Technological tower with fillers
  • Tank for deaerated water
  • Air blower
  • Water intake level control
  • Dry-run protection switch for the booster pump from the tank
  • Overflow at high water level in the reservoir

 

How it works

The process of CO2 degassing>

Water dissipates from the top, seeping through the volume of plastic filler rings.

At the same time, atmospheric air is blown in from below by an air blower, rising in a counter-flow upward through the filler rings, which leads to mass transfer of CO2 from the water.

Since the partial pressure of CO2 in atmospheric air is lower than the partial pressure of dissolved CO2 in water, CO2 will pass from the water into the air. The resulting mixture of air and CO2  exits through the top, and degassed water exits through the bottom.

h2 style="text-align: center;">Application of CO2degassing unit

Reference

CO2 degassing of boiler water

Gelatin production requires clean, demineralized water and food-grade steam. This is achieved by using UPCORE™ technology in combination with CO2 degassing.

CO2 degasser for boiler water

Feedback