As water consumption steadily rises and groundwater sources remain limited, the water deficit is increasingly met using surface water bodies.
Drinking water must meet rigorous quality standards. Similarly, the normal, stable operation of industrial machinery and equipment depends on the quality of the water used in industrial processes; therefore, such water must also undergo thorough purification and comply with established standards.
However, water quality is often poor, making the issue of water purification highly relevant today.
The quality of wastewater intended for subsequent use as drinking water or for domestic purposes can be improved through specialized treatment methods. To this end, treatment units are constructed and integrated into comprehensive water treatment stations.
Yet, attention must be paid to purification beyond just the water intended for human consumption. All wastewater, after undergoing specific treatment stages, is discharged into water bodies or onto the land. If such wastewater contains harmful impurities at concentrations exceeding permissible limits, it causes serious environmental damage. Consequently, efforts to protect water bodies, rivers, and the environment as a whole begin with improving wastewater treatment quality. Beyond their primary function, specialized wastewater treatment facilities allow for the recovery of useful substances from the effluent, which can be utilized later—potentially even in other industrial processes.
The required degree of wastewater treatment is regulated by legislation, specifically the “Rules for the Protection of Surface Waters from Wastewater Pollution” and the “Fundamentals of Water Legislation of the Russian Federation.”
All treatment facility complexes can be categorized into water supply systems and sewage (wastewater) systems. Each category can be further subdivided based on structural design, composition, and the specific purification technologies employed. Water Treatment Plants
The water treatment methods employed—and consequently the composition of the treatment facilities themselves—are determined by the quality of the source water and the required quality of the treated water output.
The treatment technology encompasses clarification, decolorization, and disinfection processes. These are achieved through sedimentation, coagulation, filtration, and chlorination. If the source water is not heavily contaminated, certain process steps may be omitted.
The most common methods for clarifying and decolorizing water at treatment plants are coagulation, filtration, and sedimentation. Sedimentation typically takes place in horizontal settling tanks, while filtration utilizes various filter media or contact clarifiers.
Experience in constructing water treatment facilities in this country has shown that the most widely used designs are those featuring horizontal settling tanks and rapid filters as the primary treatment components.
Uniform requirements for treated drinking water dictate a virtually identical composition and structure for these facilities. For instance, every water treatment plant—regardless of capacity, throughput, type, or other specific characteristics—includes the following components:
— reagent dosing systems with mixers;
— flocculation chambers;
— horizontal (or less frequently, vertical) settling tanks and clarifiers;
— mechanical filters;
— treated water storage tanks;
— pumping stations;
— auxiliary, administrative, and staff facilities.
A standardized workflow is currently used for drinking water treatment,
allowing all relevant factors to be taken into account during the design phase of the treatment facilities. The first step involves identifying the water intake facility and its source, which may be groundwater (shallow aquifers, deep groundwater, etc.) or surface water (rivers, lakes, reservoirs). During the selection process, it is important to consider water quality indicators and the concentration of chemical constituents (such as beryllium, arsenic, molybdenum, etc.), ensuring they remain within permissible limits. Physical parameters—such as turbidity, taste, temperature, and color—must also be evaluated. All water characteristics are specified in the initial data.
In the second stage, based on the available data, the necessary course of action to obtain clean drinking water is determined. For instance, turbid water can be treated with flocculants, while elevated organic content requires chlorination and ozonation; these same methods can also address issues with taste or odor. Non-reagent-based purification methods are also considered, alongside an evaluation of filtration options (single-, double-, or triple-stage) and the use of settling tanks.
Once the necessary purification procedures have been determined, the configuration of the treatment facilities is selected; this involves considering several options—evaluating both reagent-based and non-reagent methods—and comparing them .are evaluated based on techno-economic indicators.
The most efficient and cost-effective scheme is selected for further, more
detailed analysis.
Equipment is selected for the chosen process scheme, and the required quantity of reagents
is calculated—storage facilities must hold a 30-day supply (this figure may vary
depending on the specific situation). The flushing method (gravity tank or flush pump)
is determined, and the water disinfection method is selected.
Once the technology has been decided upon, a construction site for the treatment
facilities must be selected, ensuring there is sufficient space to accommodate
sanitary protection zones. All necessary structures must be laid out on the site plan.
Foundation calculations are performed for the design of the treatment plant itself.