Construction and reconstruction of external water supply and sewerage networks

ECOMAX ENGINEERING LLC, together with its contractor, carries out pipeline installation using all currently known open-cut and trenchless methods. Thanks to the use of innovative, high-precision technologies and the extensive expertise of the contractor’s personnel, the pipeline installation process is executed to a high professional standard. We provide long-term warranties for all work performed.

AUGER BORING TECHNOLOGY (ABT)


Horizontal auger boring is a trenchless method used to install pipelines (such as water mains) and underground utility networks. The auger boring equipment features a specialized, high-power hydraulic system. Boring is performed exclusively in a horizontal position, moving from a launch pit to a reception pit. Deviation from the required alignment is limited to a maximum of 30 mm. ABT is suitable for use beneath existing infrastructure such as railways, lakes, residential buildings, or roadways. This technology enables the creation of a borehole—through which pipes of up to 50 meters in length can subsequently be installed. The technical specifications of the materials used depend primarily on soil conditions. Borehole formation begins once the launch and reception pits are ready; these are excavated to a level one meter below the intended depth of the pipes. Drilling a pilot hole is a fundamental stage in the construction of underground utility networks. The quality of the work depends not only on the contractor’s capabilities but also on various environmental factors.

In the second stage, the borehole is enlarged to the required diameter by attaching a specialized reamer to the pilot rods. The third stage involves pushing the product pipe into place while simultaneously extracting the casing. Upon completion of the operation, the augers are professionally installed and subsequently removed. Horizontal auger boring (HAB) involves the installation of pipes of various diameters made from iron, polyethylene, and other materials. Additionally, this method can be used to lay gravity-flow sewer pipes and utility networks. Thanks to the precise prediction of boring paths, auger boring is widely used to connect utility lines to existing residential and non-residential buildings.

Order horizontal auger boring services from ECOMAX ENGINEERING.

HORIZONTAL DIRECTIONAL DRILLING (HDD) TECHNOLOGY


HDD is in high demand for the installation of underground utility networks (heating, gas, water, and oil pipelines; power cables; and sewer systems). This trenchless drilling method offers numerous advantages and ensures high-quality execution of work beneath lakes, densely populated areas, and railways, as well as in areas with existing utility infrastructure. When necessary, the process allows for boring beneath these obstacles to facilitate the installation work.

These bores are executed using HDD technology. The process involves excavating entry and exit pits, which significantly simplifies the installation of utility lines. Most importantly, the asphalt surface remains intact and undamaged.

The work is performed by experienced specialists using a drilling rig equipped with a specialized locator. The device’s screen displays the drill’s underground movement in real time. If the trajectory shifts, the specialist immediately notifies the machine operator.

If large stones or other objects obstruct the tool’s path, the operator can easily adjust the drill head’s trajectory. The locator allows for the monitoring of various key parameters. Horizontal Directional Drilling (HDD) involves the following stages:

Preparatory stage.
Drilling the pilot hole.
Reaming (enlarging the borehole).
Pipe installation.
Final stage.
In terms of saving time and money, horizontal directional drilling is the optimal choice. Using HDD eliminates the need for expensive earthworks, reduces costs associated with hiring highly paid specialists, and lowers electricity expenses.

Horizontal directional drilling allows the necessary work to be carried out without dismantling railway tracks or roadways, while bodies of water and forest areas remain undisturbed.

OPEN-CUT PIPE LAYING METHOD


The open-cut method of pipe laying is typically used in Russian settlements where it is impossible to employ the necessary high-precision equipment. Key disadvantages of this installation method include higher costs, damage to the landscape and road surfaces, and traffic disruption. …operations.

Upon completion of open-cut work, significant effort and financial resources are required to repair damage to transport routes and asphalt surfaces. This pipe installation method involves excavating trenches to the required depth. It also encompasses preparatory stages such as trench shoring and pipe assembly. The installation process includes: leveling the trench bottom; securely shoring the walls to prevent collapse; installing the pipes and covering them with protective material; backfilling the trench; and restoring the landscape and asphalt surfacing.

PIPE JACKING TECHNOLOGY (PJT)


Pipe jacking technology (PJT) is designed for trenchless pipe installation. This method is widely used for installing pipelines made of various materials, as well as steel casings. A key advantage of PJT is the complete absence of pipeline sagging, with the bore located precisely at the designated position. Additional benefits include low electricity consumption and relatively rapid installation speeds.

PJT involves driving a pipe—equipped with a cutting edge—into the soil using powerful hydraulic jacks. As the pipe is forced forward, the soil core entering the pipe is broken up and removed from the working face using either mechanical or manual methods.

Specialized jacks are installed in the starting trench, and high-pressure pumps are set up at the surface. The core operating principle involves the incremental pushing of the pipe, with the hydraulic jack cycling between forward and reverse positions. In the final stage, the specialized equipment is removed, and both the starting and receiving trenches are backfilled. Trenchless technology allows for operations amidst existing roads, railway tracks, lakes, forested areas, and varied terrain. Crucially, seamless and high-quality work can be performed without the need for demolition or the creation of temporary obstacles at these locations, ensuring no harm comes to the environment.

This technology is also employed for pipeline maintenance, repair, and reconstruction. The process does not require the destruction of existing pipes; even if a material change is necessary, only the defective section needs to be replaced.

Installing utility lines via pipe jacking is a practical solution in such scenarios. Notably, there is no need to hire highly paid specialists, and the work can be carried out in densely built-up areas or alongside existing utility networks—advantages not shared by open-cut installation methods. Trenchless technology is also indispensable for work in residential neighborhoods, as it generates significantly less dust and dirt.

TRENCHLESS PIPELINE MAINTENANCE: THE “PIPE-IN-PIPE” METHOD


Failure to perform timely maintenance on faulty pipelines can sooner or later lead to a serious emergency, necessitating urgent repairs. This results in a significant expenditure of time, effort, and money. Conducting emergency repairs using the open-cut method is extremely inconvenient, particularly in busy urban environments. Excavating a trench generates large volumes of soil, requiring heavy machinery for its removal—a process that becomes highly complicated in congested areas or where existing utility lines are present.

The risk of damage is further heightened by the frequent lack of documentation confirming the location of existing utilities. Consequently, the open-cut method may prove entirely unfeasible, making trenchless pipeline replacement the ideal solution. This method encompasses technologies used for the installation, repair, replacement, or maintenance of utility networks.

Trenchless methods are in increasingly high demand, particularly in today’s rapidly developing world. A common application involves the replacement of irreparable pipeline sections with polymer pipes using pneumatic piercing tools—a technology that offers numerous significant advantages.

Technical aspects:

significantly reduced risk of future damage to utility networks;
compact equipment size facilitates work in hard-to-reach areas;
increased pipeline flow capacity;
suitability for work in unstable soil conditions.
Economic aspects:

no costs associated with excavation and soil removal;
rapid project completion without compromising quality;
minimal personnel required to carry out the work;
no need for heavy machinery.
Social factors:

traffic flow remains uninterrupted;
landscape integrity is preserved….operations;
working in the historic district of a settlement poses no threat of demolition or damage to architectural monuments.
When do pipes need replacing?

Defective sections have developed.
The pipeline has suffered structural failure.
Complete pipe disintegration due to the aggressive action of chemical agents.
Our company offers a practical and cost-effective solution for high-quality utility infrastructure repair using trenchless technology. Partnering with us saves you significant time and money. We also offer a flexible discount system for regular clients.

A key advantage of this method is the ability to rehabilitate deteriorated pipelines by installing new ones—for example, made of HDPE. After the old pipes are removed, new ones—typically larger in diameter—are installed. These larger-diameter pipes increase flow capacity. The process utilizes high-performance polymer pipes with a service life of 50 to 100 years.

Specialized equipment moves through the pipeline driven by pneumatic impulses generated by a compressor. A specialized pneumatic impact head breaks apart the damaged sections of the existing pipe. An expander enlarges the bore, allowing the new pipe to be pulled into the cleared space simultaneously as the old pipe is destroyed.

The final stage involves a video inspection to verify the entire process and assess the quality of the work performed. Using a pneumatic impact machine to replace aging pipelines significantly reduces costs due to several factors: project timelines are shortened; there is no need for a large workforce; bulky, cumbersome heavy machinery is not required; there is no need to excavate trenches across the entire site; and asphalt or road surfaces remain intact. By employing the trenchless method, our company guarantees:

Minimization of environmental fees, as this method causes no harm to the environment.
Optimization of energy costs associated with the construction process.
Extended warranty periods for the work performed on specific pipeline sections.
Significant reduction in pipeline maintenance and repair costs, thanks to the durability and high quality of the materials used.
Please contact us; we would be happy to answer any questions, provide a detailed consultation, and explain the advantages of the trenchless method for replacing aging pipelines in greater detail. Our team of specialists is committed to delivering quality results! We value our hard-earned reputation and take an individual approach to every client.

Feedback