Mixed-bed unit with on-site regeneration

FSD Demineralizer Unit for Demineralized Water

FSD Demineralizer Unit is used for fine polishing in high-tech processes, such as medical and electronic industries, hospitals, power plants.

Treatment of demineralized water with low carbon dioxide content leads to a decrease in electrical conductivity of less than 0.1 μS/cm. at 10°C. The mixed ion exchange unit is available in 6 standard modules with a capacity of up to 50 m3/h. 

 

Features of the installation of the FSD demineralizer

Anti-corrosion housings

The filter housings are made of steel and are therefore less sensitive to pressure drops. The tanks are covered with polyethylene. Thus, the filters combine the strength of steel with the strong anti-corrosion properties of synthetic material.

Control

Standard PLC control using a 7" touch screen as HMI. Modular standard program with various control configurations, such as quality control, volume control or timer control. Customer-specific changes can be made without a programmer. Fully documented manual and power supply cabinet.    

Automatic regeneration

Regeneration begins with the separation of the two layers of ion exchangers. This is followed by regeneration with hydrochloric acid and sodium hydroxide. After various rinses, the two ion exchange layers are mixed again using compressed air.

Individual

Continuous operation

For continuous operation, FSD demineralizer units can be installed in series with two (duplex) or three (triplex) tanks. The units are controlled in such a way that one of the units is always running. When the capacity is exhausted, the unit is regenerated and put into standby mode, while the other unit is in operation. Duplex and triplex units are available on a skid.

Contact us for more information 

 

Triplex mixed-bed plant for continuous operation

Ultrapure water for a steam turbine

At a waste-to-energy plant, the water treatment solution consists of several demineralization units based on ion exchange technology. This ensures reliable and safe operation even under unstable feed water conditions. 

The water is polished in a conventional FSD demineralizer unit, leaving demineralized water with very low conductivity.

Get the optimal solution

The choice of installation depends on the area of application, quality and consumption of water. We are at your service to find the optimal solution based on our know-how. Fill out the form and we will contact you.


 

Feedback