Thermal deaerator used in food processing industry

Thermal Deaerator

Thermal deaerator is used to reduce the oxygen content in the feedwater of steam boilers. Without proper treatment, the feedwater for steam boilers usually has a high oxygen content of 8-10 mg / L, which causes critical corrosion in the system.

Theory of Operation

Condensate and make-up water are mixed to a temperature of 60-70 ° C before entering the top of the deaerator. In the top of the deaerator, water evaporates so that gases can escape from the layer that surrounds each water molecule.

Steam is fed to the bottom of the deaerator through a steam pressure reducing valve, and steam injectors create the necessary turbulence in the water for effective deaerating. Excess gases are released through a restricted vent.

Unit design

The ECOMAX thermal deaerator is available in 12 modules with a capacity of up to 40 m3/h and a body volume from 1450 liters to 23150 liters. The deaerator tank is made of steel with end caps for higher pressure tolerances and is designed according to CE standards.

The thermal deaerator operates at an excess pressure of 0.2 bar, which corresponds to an evaporating temperature of 104 °C.

All units are supplied with standard documentation that simplifies installation, operation and maintenance.

 

Contact your local sales and service office for further information, data sheets or instructions. 


Softening unit SM SG

Thermal deaerator

Product type: TA
Water quality: 50 ppb O2
Water inlet: Directly into the tank
Contact time: ~20 min.
Switch: 2 levels
operational+ dry running
Visual inspection: Level window
Steam distribution:

Pipe with nozzles

External coating: Yes
Inner coating: Yes
Softening unit SM SG

Thermal Deaerator with Dome

Product Type: TD
Water Quality: 20 ppb O2
Water Supply: To the Top of the Dome
Contact Time: ~30 min.
Switch: Level 1
Dry running
Visual inspection: Level window with level relay
Steam distribution: Pipe with nozzles
Outer coating: Yes
Inner coating: No
Dome: AISI 304L

Premium design and reliable operation

Thermal deaerator with dome.

  • Dome with trays
    Ensures very reliable and stable operation and is insensitive to flow rate variations. 
  • Single steam injection
    Steam injection is carried out from the bottom of the collection tank, which makes it easy to operate and ensures that all steam passes through the dome.
  • Excellent water quality
    Oxygen levels less than 20 ppb. 

Equipment

Thermal deaerator with or without dome, suitable for steam boilers, supplied complete with fittings, i.e. steam pressure reducing valve and safety valve, level regulator, water level indicator, thermometer and pressure gauge.

Included in delivery Not included
Thermal deaerator Connection system pipes
Steam pressure reducing valve Support stand
Relief valve Pumps
Matching flanges Service valve

 

Option

Insulate to prevent heat loss

Prevent steam condensation and heat loss by insulating the deaerator and, in general, all installations in contact with hot water. The ECOMAX TA deaerator can be supplied with 100 mm mineral wool insulation covered with an aluminium plate.

Insulated thermal deaerator to prevent heat loss

Option

Sample Cooler - Deaerator Monitoring

Use the sample cooler to monitor the operation of a boiler or thermal deaerator. The sample cooler provides efficient counter-current cooling and no contamination of the sample being sampled.

Download the brochure to learn more about the features and benefits.

Sample cooler for thermal deaerator

Industrial Steam Boilers

Thermal deaerator plays an important role in the optimal water treatment solution for industrial steam boilers.

Get the optimal solution

The choice of installation depends on the area of application, quality and consumption of water. We are at your service to find the optimal solution based on our know-how. Fill out the form and we will contact you.


 

Feedback