Vacuum Deaerator
The risk of corrosion in a district heating system can be significantly minimized by reducing the oxygen and CO2 content of the water.
For every 1 m3 of untreated make-up water, 10-15g of iron is converted by corrosion. Untreated make-up water contains 8-10 mg/l of oxygen, but with a vacuum deaerator the oxygen content can be reduced to less than 0.2 mg/l.
Functionality of the vacuum deaerator
Oxygen-containing make-up water, preheated to 40-90 °C, is directed to the top of the deaerating tank. In order to optimize the removal of oxygen, the deaerating tank is equipped with fillers to separate the water into small particles.
A vacuum pump creates the necessary vacuum to make the make-up water boil. When the water boils, oxygen is released and removed by the vacuum pump. The deaerated water is divided into two streams, which are partly pumped to the district heating network and partly recirculated through the deaerating tank.

Stainless steel
The vacuum deaerator is available in corrosion-resistant stainless steel AISI 304.
The picture shows a vacuum deaerator made of stainless steel for removing oxygen from make-up water. The customer is one of the largest public companies in Poland, engaged in the extraction and distribution of natural resources.


Recommendation
Insulate to prevent heat loss
Insulating the vacuum deaerator and generally all installations in contact with hot water can prevent steam condensation and heat loss.
Reliable design
ECOMAX vacuum deaerators are made of both galvanized and stainless steel and are available in 6 modules with a capacity of up to 22 m3/h.
All components are selected and designed for maximum reliability with low operating costs. The vacuum deaerator consists of three main components.
For further information and technical data sheets, please contact your local ECOMAX representative.

1. Deaerating tank
The deaerator tank is made of galvanized or stainless steel. Inside, the tank is equipped with an intermediate bottom, under which a tank for deaerated water is installed. Fillers are installed on top of the intermediate bottom. The unit is equipped with switches for level control and is supplied with a bracket for wall mounting.

2. Vacuum pump unit
The vacuum pump unit consists of a vacuum pump (liquid ring pump) and a valve for adjusting the amount of cooling water and the vacuum strength. The vacuum pump is supplied on a bracket for wall mounting.

3. Pumping unit
The pumping unit consists of a centrifugal pump and a piping system with valves for regulating the amount of make-up and circulating water. The piping system is available in galvanized or stainless steel, and the pump in stainless steel.

Universal vacuum deaerator
The vacuum deaerator is also available as a compact unit with tank, control unit, heat exchanger, vacuum pump and cooling water system - all on one frame. Lightweight, compact and easy to install. Capacity - 1 m3/h.

Get the optimal solution
The choice of installation depends on the area of application, quality and consumption of water. We are at your service to find the optimal solution based on our know-how. Fill out the form and we will contact you.
